PIXCI(R) E4G2- PCI Express x4 Gen 2.0 Frame Grabber for Camera Link(R) camera(s); one or two cameras in Base, Medium, Full, or 80-Bit mode, or one to four cameras in Base mode

Switchable to support either two Base, Medium, Full or 80-Bit Camera Link mode cameras; or to support up to four Base Camera Link mode cameras (of same or different types). Provides first and second Camera Link MDR Connectors on bracket - for two Base mode cameras or one Medium, Full, 80-Bit mode camera; provides third and fourth Camera Link MDR Connectors on PCB - for two Base mode cameras or one Medium, Full, 80-Bit mode camera. Use of extension cables to access third and fourth Camera Link MDR Connectors is recommended, especially with smaller PC motherboards; optionally order OPT-FHBRKT-CL-2MDR for an additional bracket with third and fourth Camera Link MDR Connectors with extension cables from the PCB mounted Camera Link MDR Connectors. Utilizes one Camera Link cable for each Base configuration camera. Utilizes two Camera Link cables for each Medium, Full, or 80 Bit configuration. For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s). For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s). Optionally order CBL-IOM-25CM Control cable for Trigger, Frame Enable, and General Purpose Inputs, Strobe and General Purpose Outputs. Optionally add PRESET-E4G2 order code and specify the desired camera model, as per the PIXCI(R) Selection Guide (http://www.epixinc.com/guide/index.htm), to preset the PIXCI(R) E4G2 default configuration and enable camera specific features.

Compare Products