No thanks, I don't want to customize this item
Enter customization text in the field below.
Adding item(s) to basket...
Embedded PCI Express x4 Gen 2.0 frame grabber for camera link camera supporting NVIDIA TX2 module
The Epix PIXCI EL1 frame grabber supports Full, Medium, and Base configuration Camera Link cameras. Compatible with the PCI Express x1 (by one) bus, the EL1 frame grabber interfaces to more than 100 of the newest, most advanced, highest bandwidth machine vision cameras available.The Epix PIXCI EL...
The Epix PIXCI EL1DB frame grabber provides two interfaces for any two Base camera link cameras. The PIXCI EL1DB is handled by EPIX' software as if two PIXCI EL1 boards are installed. The EL1DB will accept two trigger signals one for each camera; or allows a single trigger to control capture from both cameras. A ...
Switchable to support either two Base, Medium, Full or 80-Bit Camera Link mode cameras; or to support up to four Base Camera Link mode cameras (of same or different types). Provides first and second Camera Link MDR Connectors on bracket - for two Base mode cameras or one Medium, Full, 80-Bit mode camera; provides third...
Can be used with PoCL (Power over Camera Link(R)) cameras or with non-PoCL cameras. Switchable to support either one Base, Medium, Full or 80-Bit Camera Link mode camera; or to support up to two Base Camera Link mode cameras (of same or different types). In dual Base mode software identifies as PIXCI(R) E8DB. Utilizes ...
The Epix PIXCI EB1 is a low cost, low profile frame grabber with Power over Camera Link (PoCL). The PIXCI EB1P is compatible with all area scan and line scan base configuration Camera Link cameras. Experience high speed, low latency, 2.5 gigabit per second burst image transfers to a PCI Express bus x1 through x16 slot....
Utilizes one Camera Link cable for Base configuration. For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s). For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s). Includes High ...
Utilizes one Camera Link cable for Base configuration. For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s). For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s). Order OPT-LPBR...
Utilizes one Camera Link cable for Base configuration. For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s). For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s). Includes Low P...
Extended temperature range of -20c to +85c for industrial use. Utilizes one Camera Link cable for Base configuration. For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s). For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-M...
Utilizes one Camera Link cable for Base configuration. For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s). For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, or CBL-MCLM-10M Camera Link cable(s). Cont...
Extended temperature range of -20c to +85c for industrial use. Utilizes one Camera Link cable for Base configuration. For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s). For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, ...
Utilizes one Camera Link cable for Base configuration. For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s). For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s). Contact EPIX, ...
Can be used with PoCL (Power over Camera Link(R)) cameras or with non-PoCL cameras. Utilizes one Camera Link cable for Base configuration. For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s). For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL...
Can be used with PoCL (Power over Camera Link(R)) cameras or with non-PoCL cameras. Switchable to support either one Base, Medium, Full or 80-Bit Camera Link mode camera; or to support two Base Camera Link mode cameras (of same or different types). In dual Base mode software identifies as PIXCI(R) E4DB; replaces previo...