Shopping Basket (37) $ 63986.80

Pyramid Imaging is an authorized distributor for all products on its website. Are you an OEM, reseller, integrator or academic? Please contact us to see if you qualify for a discount.

Please see our Camera Selector to quickly filter through through the noise and find the right camera for you!

EPIX CAMERA LINK for PCI Express

EPIX CAMERA LINK for PCI Express

EPIX CAMERA LINK for PCI Express frame grabbers

PIXCI E4TX2

PIXCI E4TX2

Embedded PCI Express x4 Gen 2.0 frame grabber for camera link camera supporting NVIDIA TX2 module

Please call or email.

PIXCI EL1

PIXCI EL1

Full Camera Link for PCI Express x1, 64 Bits

The Epix PIXCI EL1 frame grabber supports Full, Medium, and Base configuration Camera Link cameras. Compatible with the PCI Express x1 (by one) bus, the EL1 frame grabber interfaces to more than 100 of the newest, most advanced, highest bandwidth machine vision cameras available.The Epix PIXCI EL...

$ 710.00

PIXCI EL1DB

PIXCI EL1DB

1or2 Base Camera Link for PCI Express x1,24Bits x2

The Epix PIXCI EL1DB frame grabber provides two interfaces for any two Base camera link cameras. The PIXCI EL1DB is handled by EPIX' software as if two PIXCI EL1 boards are installed. The EL1DB will accept two trigger signals one for each camera; or allows a single trigger to control capture from both cameras. A ...

Please call or email.

PIXCI(R) E4G2- PCI Express x4 Gen 2.0 Frame Grabber for Camera Link(R) camera(s) one or two cameras in Base, Medium, Full, or 80-Bit mode, or one to four cameras in Base mode

PIXCI(R) E4G2- PCI Express x4 Gen 2.0 Frame Grabber for Camera Link(R) camera(s); one or two cameras in Base, Medium, Full, or 80-Bit mode, or one to four cameras in Base mode

Switchable to support either two Base, Medium, Full or 80-Bit Camera Link mode cameras; or to support up to four Base Camera Link mode cameras (of same or different types). Provides first and second Camera Link MDR Connectors on bracket - for two Base mode cameras or one Medium, Full, 80-Bit mode camera; provides third...

$ 985.00

PIXCI(R) E8 PCI Express x8 Frame Grabber for Camera Link(R) PoCL or non-PoCL camera(s) in Medium, Full, 80-Bit modes and in Base mode (single or dual camera)

PIXCI(R) E8 PCI Express x8 Frame Grabber for Camera Link(R) PoCL or non-PoCL camera(s) in Medium, Full, 80-Bit modes and in Base mode (single or dual camera)

High Bandwidth Camera Link Frame Grabber

Can be used with PoCL (Power over Camera Link(R)) cameras or with non-PoCL cameras. Switchable to support either one Base, Medium, Full or 80-Bit Camera Link mode camera; or to support up to two Base Camera Link mode cameras (of same or different types). In dual Base mode software identifies as PIXCI(R) E8DB. Utilizes ...

$ 875.00

PIXCI(R) EB1

PIXCI(R) EB1

Base Camera Link for PCI Express x1, 24bits,

The Epix PIXCI EB1 is a low cost, low profile frame grabber with Power over Camera Link (PoCL). The PIXCI EB1P is compatible with all area scan and line scan base configuration Camera Link cameras. Experience high speed, low latency, 2.5 gigabit per second burst image transfers to a PCI Express bus x1 through x16 slot....

$ 369.00

PIXCI(R) EB1 PCI Express x1 gen 2 Frame Grabber for Camera Link(R) camera in Base mode

PIXCI(R) EB1 PCI Express x1 gen 2 Frame Grabber for Camera Link(R) camera in Base mode

Base Mode

Utilizes one Camera Link cable for Base configuration. For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s). For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s). Includes High ...

$ 545.00

PIXCI(R) EB1 PCI Express x1 gen 2 Frame Grabber for Camera Link(R) camera in Base mode, w/out DB-9 Connector

PIXCI(R) EB1 PCI Express x1 gen 2 Frame Grabber for Camera Link(R) camera in Base mode, w/out DB-9 Connector

Base mode without DB-9 Connector

Utilizes one Camera Link cable for Base configuration. For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s). For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s). Order OPT-LPBR...

$ 517.00

PIXCI(R) EB1 PCI Express x1 gen 2 Frame Grabber for Camera Link(R) camera in Base mode, with Low Profile Bracket

Low Profile Bracket

Utilizes one Camera Link cable for Base configuration. For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s). For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s). Includes Low P...

$ 517.00

PIXCI(R) EB1mini Industrial PCI Express Mini Card Frame Grabber for Base Camera Link(R)

PIXCI(R) EB1mini Industrial PCI Express Mini Card Frame Grabber for Base Camera Link(R)

Extended temperature range of -20c to +85c for industrial use. Utilizes one Camera Link cable for Base configuration. For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s). For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-M...

$ 468.00

PIXCI(R) EB1mini PCI Express Mini Card Frame Grabber for Base Camera Link(R)

PIXCI(R) EB1mini PCI Express Mini Card Frame Grabber for Base Camera Link(R)

Utilizes one Camera Link cable for Base configuration. For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s). For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, or CBL-MCLM-10M Camera Link cable(s). Cont...

$ 358.00

PIXCI(R) EB1miniF-M Industrial PCI Express Mini Card two board Frame Grabber with CL(MDR) connector for Base Camera Link(R), attached with 20.32 centimeter cable

PIXCI(R) EB1miniF-M Industrial PCI Express Mini Card two board Frame Grabber with CL(MDR) connector for Base Camera Link(R), attached with 20.32 centimeter cable

Industrial Use

Extended temperature range of -20c to +85c for industrial use. Utilizes one Camera Link cable for Base configuration. For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s). For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, ...

$ 627.00

PIXCI(R) EB1miniF-M PCI Express Mini Card two board Frame Grabber with CL(MDR) connector for Base Camera Link(R), attached with 20.32 centimeter cable

PIXCI(R) EB1miniF-M PCI Express Mini Card two board Frame Grabber with CL(MDR) connector for Base Camera Link(R), attached with 20.32 centimeter cable

Utilizes one Camera Link cable for Base configuration. For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s). For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s). Contact EPIX, ...

$ 479.00

PIXCI(R) EB1miniF-S Industrial PCI Express Mini Card two board Frame Grabber with MiniCL(SDR) connector for Base Camera Link(R), attached with 20.32 centimeter cable

PIXCI(R) EB1miniF-S Industrial PCI Express Mini Card two board Frame Grabber with MiniCL(SDR) connector for Base Camera Link(R), attached with 20.32 centimeter cable

Industrial use

Extended temperature range of -20c to +85c for industrial use. Utilizes one Camera Link cable for Base configuration. For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s). For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-M...

$ 627.00

PIXCI(R) EB1miniF-S PCI Express Mini Card two board Frame Grabber with MiniCL(SDR) connector for Base Camera Link(R), attached with 20.32 centimeter cable

PIXCI(R) EB1miniF-S PCI Express Mini Card two board Frame Grabber with MiniCL(SDR) connector for Base Camera Link(R), attached with 20.32 centimeter cable

Utilizes one Camera Link cable for Base configuration. For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s). For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, or CBL-MCLM-10M Camera Link cable(s). Cont...

$ 479.00

PIXCI(R) EB1miniG-M Industrial PCI Express Mini Card two board Frame Grabber with CL(MDR) connector for Base Camera Link(R), attached with 30 centimeter cable

PIXCI(R) EB1miniG-M Industrial PCI Express Mini Card two board Frame Grabber with CL(MDR) connector for Base Camera Link(R), attached with 30 centimeter cable

Industrial Use

Extended temperature range of -20c to +85c for industrial use. Utilizes one Camera Link cable for Base configuration. For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s). For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, ...

Please call or email.

PIXCI(R) EB1miniG-M PCI Express Mini Card two board Frame Grabber with CL(MDR) connector for Base Camera Link(R), attached with 30 centimeter cable

PIXCI(R) EB1miniG-M PCI Express Mini Card two board Frame Grabber with CL(MDR) connector for Base Camera Link(R), attached with 30 centimeter cable

Utilizes one Camera Link cable for Base configuration. For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s). For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s). Contact EPIX, ...

$ 380.00

PIXCI(R) EB1miniG-S Industrial PCI Express Mini Card two board Frame Grabber with MiniCL(SDR) connector for Base Camera Link(R), attached with 30 centimeter cable

PIXCI(R) EB1miniG-S Industrial PCI Express Mini Card two board Frame Grabber with MiniCL(SDR) connector for Base Camera Link(R), attached with 30 centimeter cable

Industrial Use

Extended temperature range of -20c to +85c for industrial use. Utilizes one Camera Link cable for Base configuration. For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s). For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-M...

$ 517.00

PIXCI(R) EB1miniG-S PCI Express Mini Card two board Frame Grabber with MiniCL(SDR) connector for Base Camera Link(R), attached with 30 centimeter cable

PIXCI(R) EB1miniG-S PCI Express Mini Card two board Frame Grabber with MiniCL(SDR) connector for Base Camera Link(R), attached with 30 centimeter cable

Utilizes one Camera Link cable for Base configuration. For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s). For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, or CBL-MCLM-10M Camera Link cable(s). Cont...

$ 380.00

PIXCI(R) EB1miniH Industrial PCI Express Half Mini Card two board Frame Grabber with MiniCL(SDR) connector for Base Camera Link(R), attached with 30 centimeter cable

PIXCI(R) EB1miniH Industrial PCI Express Half Mini Card two board Frame Grabber with MiniCL(SDR) connector for Base Camera Link(R), attached with 30 centimeter cable

Industrial Use

Extended temperature range of -20c to +85c for industrial use. Utilizes one Camera Link cable for Base configuration. For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s). For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-M...

$ 517.00

PIXCI(R) EB1miniH PCI Express Half Mini Card two board Frame Grabber with MiniCL(SDR) connector for Base Camera Link(R), attached with 30 centimeter cable

PIXCI(R) EB1miniH PCI Express Half Mini Card two board Frame Grabber with MiniCL(SDR) connector for Base Camera Link(R), attached with 30 centimeter cable

Utilizes one Camera Link cable for Base configuration. For cameras with CL(MDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s). For cameras with MiniCL(SDR) connectors, use CBL-MCLM-1M, CBL-MCLM-2M, CBL-MCLM-3M, CBL-MCLM-5M, or CBL-MCLM-10M Camera Link cable(s). Cont...

$ 435.00

PIXCI(R) EB1-PoCL PCI Express x1 gen 2 Frame Grabber for Camera Link(R) PoCL or non-PoCL camera in Base mode

PIXCI(R) EB1-PoCL PCI Express x1 gen 2 Frame Grabber for Camera Link(R) PoCL or non-PoCL camera in Base mode

PoCL or non-PoCL camera in base mode

Can be used with PoCL (Power over Camera Link(R)) cameras or with non-PoCL cameras. Utilizes one Camera Link cable for Base configuration. For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s). For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL...

$ 600.00

PIXCI-E4- PIXCI(R) E4 PCI Express x4 Frame Grabber for Camera Link(R) PoCL or non-PoCL camera(s) in Medium, Full, 80-Bit modes and in Base mode (single or dual camera)

PIXCI-E4- PIXCI(R) E4 PCI Express x4 Frame Grabber for Camera Link(R) PoCL or non-PoCL camera(s) in Medium, Full, 80-Bit modes and in Base mode (single or dual camera)

Full Camera Link for PCI Express x4, 80 Bits

Can be used with PoCL (Power over Camera Link(R)) cameras or with non-PoCL cameras. Switchable to support either one Base, Medium, Full or 80-Bit Camera Link mode camera; or to support two Base Camera Link mode cameras (of same or different types). In dual Base mode software identifies as PIXCI(R) E4DB; replaces previo...

$ 875.00

PIXCI-EB1G2-NDB9- PIXCI(R) EB1 PCI Express x1 Frame Grabber for Camera Link(R) camera in Base mode, w/out DB-9 Connector

PIXCI-EB1G2-NDB9- PIXCI(R) EB1 PCI Express x1 Frame Grabber for Camera Link(R) camera in Base mode, w/out DB-9 Connector

Utilizes one Camera Link cable for Base configuration. For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s). For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s). Order OPT-LPBR...

$ 352.00

PIXCI-EB1-LP- PIXCI(R) EB1 PCI Express x1 Frame Grabber for Camera Link(R) camera in Base mode, with Low Profile Bracket

Base Mode low profile

Utilizes one Camera Link cable for Base configuration. For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s). For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s). Includes Low P...

$ 352.00