No thanks, I don't want to customize this item
Enter customization text in the field below.
Adding item(s) to basket...
Phoenix Frame Grabbers also supports various camera tap formats, such as line interlaced – adjacent lines are output simultaneously; line offset – lines are output from different parts of the CCD simultaneously; pixel interlaced – adjacent pixels on the same line are output simultaneously; and pixe...
FireBird is designed for ultimate performance using Active Silicon’s proprietary DMA Engine technology, “ActiveDMA”. This technical innovation applies RISC based processor techniques and guaranties zero CPU intervention, high speed and low latency image data transfers. FireBird supports the ...
FireBird is designed for ultimate performance using Active Silicon’s proprietary DMA Engine technology, “ActiveDMA”. This technical innovation applies RISC based processor techniques and guaranties zero CPU intervention, high speed and low latency image data transfers. CoaXPress is a leading ...
FireBird is designed for ultimate performance using Active Silicon’s proprietary DMA engine technology, “ActiveDMA”. This technical innovation applies RISC based processor techniques and guarantees zero CPU intervention, high-speed and real-time image data transfers.he CXP6-2PE4L is a low profile frame grabber with hig...
The FireBird Quad CXP-12 3PE4 supports one 2-link camera or two 1-link cameras up to CXP-12 for simultaneous streaming. Each CoaXPress link supports up to 12.5 Gbps data rates along with device power up to 13W and device control at up to 42 Mbps.
The FireBird Quad CXP-12 3PE8 frame grabber is designed for ultimate performance using Active Silicon's proprietary DMA Engine technology. It supports either one 4-link camera, two 2-link cameras, or up to four 1-link cameras, all up to CXP-12.
4 x USB 3.0 compliant downstream ports.Dual full USB 3.0 bandwidth architecture with each channel split into 2 x USB 3.0 ports.Based on proven Renesas USB 3.0 Host Controller.Compliant with USB 3.0 specification Rev.1.0 and Intel xHCI specification Rev. 1.0.Support for USB3 V...
The Phoenix-D24CL is a single lane (x1) PCI Express board for capture from a single Base Camera Link camera. Affordable yet with extra bandwidth and features to cope with today’s more demanding cameras. Supports Power over Camera Link (PoCL) and SafePower. -Base Camera Link Configuration. -Single lane (x1) v1.1 PCI ...
The Phoenix-D36 x1 is a single lane (x1) PCI Express board for capture from LVDS and RS-422 camera sources with a maximum bit depth of 36-bits. There is extensive onboard I/O along with serial port functionality. -36 bit EIA-644 (LVDS) data, 4 bits for control. -x1 v1.1 PCI Express interface. -PCIe burst rates in exc...
The Phoenix-D36 x4 is a four lane (x4) PCI Express board for capture from LVDS and RS-422 camera sources with a maximum bit depth of 36-bits. There is extensive onboard I/O along with serial port functionality. -36 bit EIA-644 (LVDS) data, 4 bits for control. -4 lane v1.1 PCI Express interface. -PCIe burst rates in ...
The Phoenix-D48CL PCI/104e is an industrial embedded form factor board for capture from a single Base, dual Base or Medium Camera Link cameras. It uses the PCI Express extension to the well established PCI/104-Plus standard and thus offers the flexibility of the Camera Link interface in a truly embedded and rugged form...