PIXCI(R) Cables, Accessories and Options

Converter of RS644 differential input and output to TTL input and output

Includes TTL to Differential converter, and CBL-D9-EXTMM-6FT six ft. extension cable.

DB9 Extension Cable, 6 feet

9 pin D-sub male to 9-pin D-sub female.

DB9 Extension Cable, 6 feet

9 pin D-sub male to 9-pin D-sub male.

EMI Shielding Option for PIXCI(R) EC1, ECB1-34, ECB2

Option for additional EMI shielding for passing FCC and CE emission testing. Available for: PIXCI-EC1 PIXCI-ECB1-34, and PIXCI-ECB2. Factory installed option available at time of purchase. Without additional shielding, ExpressCard frame grabbers are not FCC and CE emission compliant.

Full height bracket for <PLO>PIXCI-EB1</PLO>, <PLO>PIXCI-EB1P</PLO>, <PLO>PIXCI-EB1G2</PLO>, or <PLO>PIXCI-EB1G2P</PLO>

Same as the default bracket provided with PIXCI-EB1, PIXCI-EB1P, PIXCI-EB1G2, and PIXCI-EB1G2P.

Internal Camera Link cable, CL(MDR) connectors, 30 cm

Internal Camera Link cable, Male Right-Angle Exit-Up (MDR) to Female Exit-Straight (MDR), 30 centimeters. For use with PIXCI-E4G2.

Low profile bracket for <PLO>PIXCI-EB1</PLO>, <PLO>PIXCI-EB1P</PLO>, <PLO>PIXCI-EB1G2</PLO>, <PLO>PIXCI-EB1G2P</PLO>, for use in low profile computers

Trigger In or Strobe Out Cable for EC1, SMB to BNC Plug, 1 meter

Trigger In or Strobe Out Cable for ECB2, SMB to BNC Plug, 1 meter

The ECB2 will accept two trigger signals, one for each camera; or allows a single trigger to control capture from both cameras.. Purchase 1 or 2 cable(s) for Trigger IN only or Strobe OUT only. Purchase 2 or 4 cables for Trigger IN with Strobe OUT (pair).

Trigger/Strobe Cable for ECB1-34, Micro Connector (board) to SMA (user), 25 centimeter

Purchase 1 cable for Trigger IN only or Strobe OUT only. Purchase 2 cables for Trigger IN with Strobe OUT. Factory installation of cables is recommended.

XCLIB Software Development Kit (SDK)

For all supported platforms and operating systems; for all PIXCI(R) imaging boards. Includes 32 bit library for 32 bit applications under Linux 32 bit and and Intel i386: Supports all PIXCI(R) imaging boards. Includes 64 bit library for 64 bit applications under Linux 64 bit and Intel x86-64: Supports all PCI Express a...

XCLIB w. PXIPL Software Development Kit (SDK)

For all supported platforms and operating systems; for all PIXCI(R) imaging boards. Includes 32 bit library for 32 bit applications under Linux 32 bit and and Intel i386: Supports all PIXCI(R) imaging boards. Includes 64 bit library for 64 bit applications under Linux 64 bit and Intel x86-64: Supports all PCI Express a...

XCLIB-Lite Software Development Kit (SDK)

XCLIB-Lite is limited to using no more than 64 MB of memory for video frame buffers, and is limited to operating only one PIXCI(R) imaging board and one camera. For all supported platforms and operating systems; for all PIXCI(R) imaging boards. Includes 32 bit library for 32 bit applications under Linux 32 bit and and ...