No thanks, I don't want to customize this item
Enter customization text in the field below.
Adding item(s) to basket...
The ball base has a hole pattern to fit most standard T-slot aluminum extrusions. The through hole can be used for routing wires, cables, or small hoses. There is an exit groove out the side of the base for cables, hose, and wires
The knuckle uses a double socket configuration to clamp the ball on a base, link, or sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing capability.
The Tee Knuckle was designed to work with a Tee Link to create two branches from one base. These knuckles can also be used to give a full 180 range of motion if you do not need through cable routing.
This product is a ball only that can be used with a 1/2 NPT threaded pipe to acquire any length necessary. The ball size fits our standard series.
Links are used with knuckles to extend the reach and increase the flexibility. Standard series are available in 5 lengths: 2, 4, 6, 8, and 12. Links are hollow to continue the cable routing ability. Example: AFSB-3-6 would be a 6 link.
The Tee Link, when used with a Tee Knuckle gripped on the center ball, creates two separate branches. The hole in the center ball allows cable and hose routing for each branch.