LED Cable (1 meter)

Technical Specifications

Power Connector: 12VDC, center-positive, 2.1 mm x 5.5 mm barrel

Power LED: ON = 5v board supply is present

High/Low Current LED: ON = 700mA maximum LED current, OFF = 350mA maximum LED current

RS232 Interface: Connection to PC made via standard RS232 Cable 3400 bps, 8 bit, no parity, one stop bit

USB Interface: Connection to PC made via standard USB cable to USB port. Requires installation of FTDI virtual COM port (VCP) driver on PC

Rotary Encoder: Manual LED control – 0.1% resolution

LED Connector: 6 pin mini-DIN, Constant-current sink, To enable HIGH/LOW current switch: Pins 3→5 and Pins 4→6, Must be tied together on LED harness

Compare Products