PIXCI(R) miniH2 PCI Express x1 Gen 2 Mini Card Frame Grabber for one Camera Link(R) camera in Base/Medium/Full/80-Bit mode w MDR connectors (dual)

FPGA PCB with two Camera Link(R) MDR connectors. Small flat cable connects to half size mini PCIe PCB. Has two wires for internal 12 volt DC power. 0 to +70C operation. Requires one or two Camera Link cables for each camera. For cameras with CL(MDR) connectors, use CBL-CL-1M, CBL-CL-2M, CBL-CL-3M, CBL-CL-5M, or CBL-CL-10M Camera Link cable(s). For cameras with MiniCL(SDR) connectors, use CBL-MCL-1M, CBL-MCL-2M, CBL-MCL-3M, CBL-MCL-5M, or CBL-MCL-10M Camera Link cable(s).

Compare Products