No thanks, I don't want to customize this item
Enter customization text in the field below.
Adding item(s) to basket...
The ball base has a hole pattern to fit most standard T-slot aluminum extrusions. The through hole can be used for routing wires, cables, or small hoses. There is an exit groove out the side of the base for cables, hose, and wires
Kit Includes: 1x AFSB-1 STANDARD BALL BASE 1x AFSB-2 STANDARD KNUCKLE 1x AFSB-8 PROX SENSOR 8MM
Kit Includes: 1x AFSB-1 STANDARD BALL BASE 1x AFSB-2 STANDARD KNUCKLE 1x AFSB-SBH STANDARD SENSOR BRACKET HOLDER 1x AFSB-SB-12 STANDARD SENSOR BRACKET 12MM
Kit Includes: 1x AFSB-1 STANDARD BALL BASE 1x AFSB-2 STANDARD KNUCKLE 1x AFSB-SBH STANDARD SENSOR BRACKET HOLDER 1x AFSB-SB-18 STANDARD SENSOR BRACKET 18MM
Kit Includes: 1x AFSB-1 STANDARD BALL BASE 1x AFSB-2 STANDARD KNUCKLE 1x AFSB-SBH STANDARD SENSOR BRACKET HOLDER 1x AFSB-SB-30 STANDARD SENSOR BRACKET 30MM
Kit Includes: 1x AFSB-1 STANDARD BALL BASE 1x AFSB-2 STANDARD KNUCKLE 1x AFSB-SBH STANDARD SENSOR BRACKET HOLDER 1x AFSB-SB-8 STANDARD SENSOR BRACKET 8MM
Contains (2) AFSB-1 bases, (2) AFSB-2 knuckles, (1) AFSB-3-12 link, and (1) Clamp Handle
Contains (2) AFSB-1 bases, (2) AFSB-2 knuckles, (1) AFSB-3-2 link, and (1) Clamp Handle
The AFSB-1004 imperial blue single arm Standard Series kit with a 4″ link is ready to mount any imperial standard series mounting plate. This kit includes: (2) AFSB-1 ball bases, (2) AFSB-2 knuckles, (1) AFSB-3-4 link, and (1) AFSB-Clamp Handle.
SINGLE ARM ROBOT TEACH PENDANT HOLDER W/ 4" LINK Kit Includes: 2x AFSB-1 STANDARD BALL BASE 2x AFSB-2 STANDARD KNUCKLE 1x AFSB-3-4 LINK 4"" 1x RB-TPH TEACH PENDANT HOLDER"
The AFSB-1004XS imperial blue single arm XS kit with a 4″ link is ready to mount any imperial XS series mounting plate. This kit includes: (2) AFSB-1XS small ball bases, (2) AFSB-2XS small knuckles, (1) AFSB-3-4XS small link, and (1) AFSB-Clamp Handle.
Contains (2) AFSB-1 bases, (2) AFSB-2 knuckles, (1) AFSB-3-6 link, and (1) Clamp Handle
Contains (2) AFSB-1 bases, (2) AFSB-2 knuckles, (1) AFSB-3-8 link, and (1) Clamp Handle
The AFSB-11012 imperial blue dual arm Standard Series kit with 12″ links is ready to mount any imperial standard series mounting plate. This kit includes: (3) AFSB-1 ball bases, (4) AFSB-2 knuckles, (1) AFSB-290 tee knuckle, (1) AFSB-3T tee link, (2) AFSB-3-12 links, and (2) AFSB-Clamp Handles.
Contains (3) AFSB-1 bases, (4) AFSB-2 knuckles, (1) AFSB-290 tee knuckle, (1) AFSB-3T tee link, (2) AFSB-3-2 links, and (2) Clamp Handles.
Contains (3) AFSB-1 bases, (4) AFSB-2 knuckles, (1) AFSB-290 tee knuckle, (1) AFSB-3T tee link, (2) AFSB-3-4 links, and (2) Clamp Handles.
This kit includes: (3) AFSB-1 ball bases, (4) AFSB-2 knuckles, (1) AFSB-290 tee knuckle, (1) AFSB-3T tee link, (2) AFSB-3-6 links, and (2) AFSB-Clamp Handles.
Contains (3) AFSB-1 bases, (4) AFSB-2 knuckles, (1) AFSB-290 tee knuckle, (1) AFSB-3T tee link, (2) AFSB-3-8 links, and (2) Clamp Handles.
The imperial blue (AFSB-1-15) ball base has a hole pattern to fit standard T-slot aluminum extrusions and the base profile is the same width as the aluminum extrusion. The through hole in the ball base can be used for routing wires, cables, or small hoses. There is an exit groove out the side of the base for cables, ho...
The knuckle uses a double socket configuration to clamp the ball on a base, link, or sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing capability.
The Tee Knuckle was designed to work with a Tee Link to create two branches from one base. These knuckles can also be used to give a full 180 range of motion if you do not need through cable routing.
This product is a ball only that can be used with a 1/2 NPT threaded pipe to acquire any length necessary. The ball size fits our standard series.
Links are used with knuckles to extend the reach and increase the flexibility. Standard series are available in 5 lengths: 2, 4, 6, 8, and 12. Links are hollow to continue the cable routing ability. Example: AFSB-3-6 would be a 6 link.
The Tee Link, when used with a Tee Knuckle gripped on the center ball, creates two separate branches. The hole in the center ball allows cable and hose routing for each branch.
The Standard Telescoping Link can be adjusted from 6″ to 10″ to center of ball ends. The hole in the center allows cable and hose routing to run thru the Telescoping link.